Philips SCD530-00 - Manual (Page 16)

If you have set the sound alert to ‘on’, the sound alert symbol ( g) appears on the display
of the parent unit.
Setting room temperature range
Note: You can only adjust the temperature range in the menu of the parent unit.
A baby will sleep comfortably in a room heated to a temperature between 61°F (16°C) and 68°F
(20°C). This is important, since a baby cannot regulate its body temperature as well as an adult. A
baby needs more time to adjust to temperature changes.
If you do not set a temperature range, the baby monitor alerts you when the temperature in your
baby’s room drops below 57°F (14°C) or rises above 86°F (30°C). In this case, the backlight of the
parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default
minimum and maximum temperature, follow the instructions below.
Note: The temperature of the baby’s room is shown on the display of both units when they are linked.
1 Select ‘Temperature’ with the + and - buttons.
 Press the OK button to confirm.
 Select ‘Range’ with the + and - buttons.
 Press the OK button to confirm.
5 Set the desired minimum temperature with the + and - buttons.
 Press the OK button to confirm.
 Set the desired maximum temperature with the + and - buttons.
8 Press the OK button to confirm.
The message ‘Saved’ appears on the display.
Note: If the temperature in the baby’s room drops below or exceeds the set temperature range, the
display is on continuously. This causes the unit to consume more power.
Temperature alert on/off
Note: You can only switch the temperature alert on and off in the menu of the parent unit.
Note: If the temperature alert is activated too often, reduce the set minimum temperature and/or
increase the set maximum temperature (see ‘Setting room temperature range’).
If the temperature alert is switched on, the parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops below the set minimum temperature. In addition,
the backlight of the parent unit display goes on, the temperature alert symbol ( t) flashes and ‘High’
or ‘Low’ appears on the display. If no minimum and maximum temperatures have been set, the
temperature alert is given when the room temperature drops below 57°F (14°C) or rises above
86°F (30°C).
1 Select ‘Temperature’ with the + and - buttons.
 Press the OK button to confirm.
 Select ‘Alert’ with the + and - buttons.
 Press the OK button to confirm.
5 If the alert is off, the display shows ‘On?’. Press the OK button to switch on the alert. If the
alert is on, the display shows ‘Off?’. Press the OK button to switch off the alert.
Vibration alert on/off
Note: You can only switch the vibration alert on and off in the menu of the parent unit.
,
,
EngliSh 1