Philips SCD535-00 - Manual (Page 22)

Environment
- Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated. Do not
wrap in metal or aluminum foil. Wrap in newspaper before discarding (Fig. 37).
- It is suggested that you contact your local town or city to determine proper battery redemption
site(s) in your area.
Warranty
FUll TWo YEar WarranTY
Philips Electronics North America Corporation (USA) and Philips Electronics Ltd (CANADA)
warrant each new Philips AVENT product, model SCD535/00, against defects in materials or
workmanship for a period of two years from the date of purchase, and agree to repair or replace
any defective product without charge. IMPORTANT: This warranty does not cover damage resulting
from accident, misuse or abuse, lack of reasonable care, or the affixing of any attachment not
provided with the product. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply call toll-free
1-800-54-AVENT (1-800-542-8368).
Frequently asked questions
This chapter lists the questions most frequently asked about the appliance. If you cannot find the
answer to your question, visit our website www.philips.com/AVENT or call 1-800-54-AVENT
(1-800-542-8368) for assistance.
Question Answer
What is ECO mode?
How does this mode
help the environment?
The ECO mode has been developed to enable you to reduce your
energy consumption. Monitoring your baby from a small distance
requires less power than monitoring your baby from a large distance.
When you monitor your baby from a small distance, you can activate
the ECO mode. By switching on the ECO mode, your baby monitor
uses less energy and is therefore more environment-friendly.
Why don’t both the
power-on light of the
baby unit and the LINK
light of the parent unit
come on when I press
the on/off buttons of
the units?
Perhaps the rechargeable battery pack of the parent unit is empty and
the parent unit is not in the plugged-in charger. Insert the small
appliance plug into the charger, put the adapter of the charger in a
power outlet and place the parent unit in the charger. Then press the
on/off button to establish connection with the baby unit.
Perhaps the non-rechargeable batteries of the baby unit are empty and
the baby unit is not connected to a power outlet. Replace the non-
rechargeable batteries or connect the baby unit to a power outlet. Then
press the on/off button to establish connection with the parent unit.
The baby unit and the parent unit may be out of range of each other.
Move the parent unit closer to the baby unit, but not closer than
3.5 feet/1 meter.
If the LINK light on the parent unit still does not start to flash, use the
reset function to reset the units to their default settings.
EngliSh 22