Apple Aperture 3.5 - Manual (Page 121)

Chapter 4 Organize and sort photos 121
You can also lift RAW Fine Tuning parameter values from one RAW image and stamp them onto
another. RAW Fine Tuning adjustments are included in lift and stamp operations by default. If you
don’t want to lift and stamp RAW Fine Tuning adjustments, you must deselect them in the Lift &
Stamp HUD. For more information about lifting and stamping adjustments, see
Apply standard
adjustments on page 225. For more information about the RAW Fine Tuning adjustments, see
RAW Fine Tuning controls overview on page 334.
Deselect the RAW
Fine Tuning checkbox.
Exclude everything but metadata from lift and stamp operations
You can use the Lift & Stamp HUD to lift and stamp metadata only.
1 Select the photo with the metadata or keywords you want to copy.
2 Choose Metadata > Lift Metadata.
The Lift & Stamp HUD appears, showing the metadata and keyword information only.
3 Select a photo or group of photos, then click the Stamp Selected Images button.
Only the selected metadata and keywords are applied to the photo selection.
Apply keywords using the Info inspector
When you select a photo, you can use the Info inspector to see the photo’s keywords and add
new keywords, if needed.
Apply keywords using the Info inspector
1 Select a photo.
2 Choose Window > Show Inspector (or press I), then click Info.
3 Choose Caption & Keywords from the Metadata View pop-up menu.
67% resize factor