Apple Aperture 3.5 - Manual (Page 63)

Chapter 3 Work with projects and the library 63
View and change project information in the Info HUD
In Projects view, you can use the Info HUD to add descriptive information about a project and
change the project’s key photo (the thumbnail image that represents the project).
1 If the Aperture main window is not in Projects view, select Projects at the top of the
Library inspector.
2 To open the Info HUD for a project, click the Info button on a project’s thumbnail.
Info button
3 In the Info HUD, do either or both of the following:
•
To add descriptive information about the project: Type a description in the text field to the right
of the project thumbnail.
•
To change the key photo for the project: Skim the project thumbnail to locate the photo you
want to set as the key photo, and click the “Click to make key photo” button.
Click to set this photo
as the key photo.
The photo you selected appears as the thumbnail image for the project.
To view or change information for another project, navigate to the project by clicking the
arrow buttons in the bottom-left corner of the Info HUD. To open a project, click the Go to
Project button. To assign location information to a photo, see
Places overview .
67% resize factor