Apply a vignette to an image – Apple Aperture 3.5 User Manual

Page 313

Advertising
background image

Chapter 7

Make image adjustments

313

3

Adjust the Falloff slider so that the edge sizes you want sharpened the most are accentuated.

4

Decrease the Intensity parameter value until the sharpening effect is appropriately subtle.

Values below 0.5 usually work best.

Sharpen an image using the legacy Sharpen controls
You use the Sharpen adjustment controls when you need to modify Sharpen adjustment
parameter settings that were applied to an image in a previous version of Aperture.

1

Select a photo.

2

If the Sharpen controls aren’t shown in the Adjustments inspector or the Adjustments pane of

the Inspector HUD, choose Sharpen from the Add Adjustment pop-up menu, and specify the
following settings:

To adjust the amount of sharpening applied to the image: Use the Intensity parameter controls.

Use the Intensity slider and

value slider to adjust the strength

of the sharpening adjustment.

Use the Radius slider and

value slider to adjust the area

over which the sharpening

adjustment is applied.

A value of 0.0 applies no sharpening adjustment to the image. A value greater than 0.0
increases the sharpening adjustment to the image.

To adjust the area over which the sharpening adjustment is applied (the distance, in pixels, that
Aperture goes from each pixel to evaluate sharpness):
Use the Radius parameter controls.
A value of 0.0 applies no sharpening adjustment to the image. A value greater than 0.0
increases the area over which the sharpening adjustment is applied.

You can also brush the Sharpen adjustment on specific areas of an image. For more information,
see

Apply brushed adjustments

on page 228.

Apply a vignette to an image

You use the Vignette adjustment controls to apply a vignette to an image. The term vignette
describes an image whose brightness fades to its periphery from its center. Vignettes are usually
applied to an image after it’s shot, for artistic effect. Aperture provides two types of vignettes:
Exposure and Gamma.

The Exposure vignette is designed to simulate a lens-created vignette.

Before Exposure Vignette

adjustment

After Exposure Vignette

adjustment

67% resize factor

Advertising