Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual
Page 22
32. Next, move back up to the top portion of the behind dash structure. Measure from the
firewall attachment surface back. Mark a line at 2” back and 4” back as shown. In
image 32.1 continue the lines down 2.5” and connect as shown. The yellow line is
your cut line for. Move any wiring in the area out of the way to prevent damage
Note – Some A/C ducting in this area will be trimmed later. Be
careful to not cut it at this time, however all is not lost if some
happens to get accidently nicked from cutting in this step.
Img. 32.1
33. Lastly, before the initial tube fitment; use the provided Upper Dash Template #1 to
trim the dash for clearance of the A-pillars. The template is made for the driver’s side
with the words up, use the opposite side for the passenger side.