Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual
Page 49
Advertising
77. After trimming, and check fitting that rocker can be installed, coat any exposed areas
of steel with paint and install using the 3/8” x 2.5” long bolt included in the kit as
shown.
Use a washer under the head of the bolt from the top.
Place the rocker spacer included in the kit between the rocker and
the bushing plate.
Fasten together using a 3/8” flange nut.
See images below.
Advertising