Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual
Page 33
Advertising
50. If desired, add tube clamps at this time for dash bar removal (Part Number: 3113-150-
125). Be sure dash bar is level with the dash and tack into place once satisfied with
fitment. **Note** paint on A-pillar will need to be removed in this area for a clean
weld.
Note, if tube clamps are not being used on dash bar, paint the
majority of the dash bar prior to tacking into place as this will
make painting much easier. Just leave the ends of the dash bar
bare to allow for welding.
Advertising