Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit - Manual (Page 26)

38. Clean up edges and trim until tube tucks neatly into place and door can close without
contacting the tube.
39. In order to close the door fully though, the lower portion of the dash will likely need
to be trimmed for where the tube exits the dash. Use the provided “Lower Dash
Template #1) to trim the dash as shown in the images below. Again, these templates
are for reference and should provide for a great starting point; however as with any
self installed kit, take careful measurements to check against before making any cuts.
See images 39.1 and 39.2 below.