Synergy 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit User Manual

Page 29

Advertising
background image

41. Once the A-pillar tube is securely tacked to the floor plate, we recommend

reinforcing the behind dash bracketry by tying the A-pillar tube to it. Included in the
kit are 4 small tabs to be used for this purpose. Position them as desired to bolt the
dash to the A-pillar in order to regain any lost structural integrity. See image below.

Use the ¼-20 hardware included in the kit as fasteners.

Advertising