IKA C 2000 control - Manual (Page 31)

IKA  -WERKE C 2000 basic / control Ver. 04 08.07
3DJH 
8. 1XPHULF NH\SDG with these keys you can enter number, decimal points and
spaces. Outside of a dialog box, you can use the point key to open or close an
additional information window for service purposes. The content of this window
can be printed out with the space bar . You can use button  to go to the
maintenance menu when there is no measurement running. Pressing button 
feeds a page if a printer is connected.
9. &RQWUDVW FRQWURO used to control the display contrast.
/RFN VFUHZ by loosening the lock screw you can change the angle of inclina-
tion of the display. To lock it in place, the screw must be tightened again.
10. Various dialog elements can be selected on the display within a dialog window.
The following dialog elements are available:
– input line
– button
– simple table
– selection table
– options table
– display elements (cannot be operated)
H[DPSOH RI D
GLDORJ ER[
1 table
2 button
H[DPSOH RI D
GLDORJ ER[
H[DPSOH RI D






1 active element
2 options table
3 selection table
4 input line