IKA C 2000 control - Manual (Page 87)

IKA  -WERKE C 2000 basic / control Ver. 04 08.07
3DJH 
 7HFKQLFDO GDWD
Measurement voltage / frequency 115 V 50 / 60 Hz
230 V 50 / 60 Hz
Power consumption 1.8 kW
Device fuses 2 x 6.25 AT; 230 V
2 x 15 AT; 115 V
Duty cycle Continuous operation
Protection type according to DIN 40 050 IP 21
Protection class 1 (protective grounding)
Over-voltage category 2
Contamination level II
Ambient temperature 20°C ... 25°C (constant)
Ambient relative humidity 80 %
Usage above sea level 2000 meters above sea level
Dimensions 440 x 450 x 500 (WxDxH)
Weight 30 kg
Measurement range 40,000 J
Measuring mode Isoperibolic 25°C
Isoperibolic 30°C
Dynamic 25°C
Dynamic 30°C
Isoperibolic measuring time About 22 min
Dynamic measuring time About 10 min
Oxygen operating pressure 30 bar
Oxygen test pressure 40 bar
Cooling medium Water via line
Flowthrough quantity min. 60 liters/hour
max. 70 liters/hour
Water operating pressure
Operation with thermostat (e.g. KV 500)
Operation connected to water tap with Pressure
Reducer C 25
0,3 bar
1 ... max. 1,5 bar
Water tap test pressure 6 bar
Interfaces 2 x serial (RS232)
1 x parallel (Centronics)
1 x keyboard (DIN socket)
1 x sample rack
1 x external monitor
Connection for external monitor:
Image frequency 115.74 Hz
Line frequency 33.333 KHz