7urxeohvkrrwlqj – IKA C 2000 control User Manual

Page 79

Advertising
background image

IKA

-WERKE C 2000 basic / control

Ver. 04 08.07

3DJH 

 7URXEOHVKRRWLQJ

The C 2000 calorimeter system is subject to strict quality control during manufac-

turing. If improper functionality should nevertheless occur, you will find in the follow-

ing section a series of malfunction situations and the appropriate measures for

remedying the malfunctions. Most malfunctions are shown in the header of the dis-

play. In addition to or instead of this, a message window may appear that the user

must acknowledge with the appropriate key/button in the control field. If your at-

tempts to remedy errors and malfunctions are unsuccessful, please contact your

authorized IKA

Technical Service Department.

 0DOIXQFWLRQ ZLWK PHVVDJH LQ WKH GLVSOD\

0HVVDJH

&DXVH

5HPHG\

1R DVVLJQPHQW SRVVLEOH

The decomposition vessel

cannot be assigned. The system

displays the malfunction and

interrupts the measurement.

Other decomposition vessels

have already been assigned to

the prepared measurements.

Use a correctly assigned decompo-

sition vessel.

% %RPE ³[´ QRW IRXQG

A decomposition vessel was

detected whose number is not

reported.

The system displays the

malfunction and interrupts the

measurement.

Incorrect number detected.

Report the decomposition vessel.

Check the code ring on the

decomposition vessel for incorrect

position or damage. In order to

continue the measurement series

you may have to turn off detection of

the decomposition vessel.

(

&RQI6HWWLQJV%RPE ,'

). If the

function cannot be restored, please

contact the Technical Service

Department.

Advertising
This manual is related to the following products: