Tilt sensor preset configuration -6 – JLG 260MRT Operator Manual User Manual
Page 28
Advertising
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6
– JLG Lift –
3121219
e. Ensure that all LED’s in the control box are working
properly.
f. Check that the platform extension extends and
retracts properly.
3.
With the platform in the stowed position:
a. Drive the machine on a level grade and stop to to
ensure the brakes hold.
b. To ensure proper operation of the tilt sensor, drive
the machine onto a grade (front/rear) greater than
the allowed tilt sensor preset (see Table 2-2 below),
and attempt to raise the platform. The tilt alarm
should sound when the platform elevation sensor
detects the platform rising.
Table 2-2. Tilt Sensor Preset Configuration
Global
Australia Only
(Special Option -
Long Leveling Jack Machines)
5°
6°
Advertising