JLG 260MRT Operator Manual - Manual (Page 32)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-10 – JLG Lift – 3121219
9. Fuel Tank (Gasoline or Diesel Engine) - Filler cap
secure, sight gauge visible, no damage or leaks.
10. Ground Controls - Switches operable, no visible dam-
age, placards secure and legible.
11. Control Valve - See Note.
12. Drive Motor, Left Rear - See Note.
13. Drive Brake, Left Rear - No loose or missing parts, no
visible damage, no evidence of leakage.
14. Manual Descent Cable and Pull Handle - See Note.
15. Ladder - No damage, securely attached.
16. Speed Cutout Switch - No visible damage, properly
secured.
17. Battery Installation (Gasoline or Diesel Engine) -
Proper electrolyte level, cables secure, no damage or
corrosion. Hold-downs secure.
18. Hydraulic Pump - Pump properly secured, no visible
damage, no evidence of leakage. Hoses and fittings
properly secured, no visible damage, no evidence of
leaks.
19. Engine Installation - Engine oil to full mark on dipstick,
oil filler cap secure. Muffler/exhaust system properly
secured, no leakage. Air filter assembly secure, no
loose or missing parts, element clean. Radiator cap
secure, coolant to correct level.
20. Steer Cylinder and Tie Rod Ends - No loose or missing
parts, no visible damage. No steer cylinder leaks or
damage.
21. Platform Assembly - See Note. Platform deck exten-
sion operates properly
Figure 2-3. Walk Around Inspection Points - Sheet 2