JLG 260MRT Operator Manual - Manual (Page 59)

SECTION 4 - MACHINE OPERATION
3121219 – JLG Lift – 4-9
4.9 TIE DOWN
When transporting the machine, the platform extension must
be fully retracted and the platform fully lowered in the stowed
mode with the machine securely tied down to the truck or
trailer deck. Four tie down eyes, one at each corner of the
machine frame, are provided for machine tie-down.
Lifting
If it becomes necessary to lift the machine, it is possible to do so
from the tie down/lift lugs. These lugs enable the machine to be
lifted using cranes or other suitable lifting devices.
NOTE: If lifting becomes necessary from the lifting lugs, Jlg
Industries Inc. recommends the use of a proper spreader
bar to avoid damage to the machine.
Cranes or other lifting devices must be capable of han-
dling 7660 lb (3475 kg)
4.10 TOWING
Although towing the machine is prohibited, provisions for
moving the machine, in case of a malfunction or power fail-
ure, have been incorporated. The following procedures are
to be used ONLY for emergency movement to a suitable
maintenance area.
1. Chock the wheels securely.
2. Locate the brake cartridge on the hydraulic control
valve, located adjacent to the hydraulic oil tank on the
left side of the machine. Depress the plunger on the
brake cartridge.
3. Locate the brake release pump, in front of the hydraulic
control valve. Install the handle on the brake release
pump and pump it to release the brake. Remove handle
when finished.
4. Using suitable equipment for assistance, remove the
chocks, winch or tow the machine to an appropriate
maintenance area.
USE EXTREME CAUTION WHEN OPENING THE TOW VALVE. THE DRIVE
FUNCTION WILL STILL OPERATE WITH THE TOW VALVE OPEN, BUT
THE BRAKE IS DISABLED. ENSURE THE TOW VALVE REMAINS
CLOSED AT ALL TIMES, EXCEPT WHEN THE MACHINE IS BEING