JLG X600AJ Operator Manual User Manual
Operation and safety manual, Model(s) x600aj, Ansi
Advertising
Table of contents
Document Outline
- FOREWORD
- SAFETY ALERT SYMBOLS AND SAFETY SIGNAL WORDS
- REVISION LOG
- Section 1. SAFETY PRECAUTIONS
- SECTION 2. PREPARATION AND INSPECTION
- SECTION 3. MACHINE CONTROLS, INDICATORS AND OPERATION
- SECTION 4. MACHINE OPERATION
- 4.1 DESCRIPTION
- 4.2 BOOM OPERATING CHARACTERISTICS AND LIMITATIONS
- 4.3 ENGINE OPERATION
- 4.4 BASE AND BOOM/JIB ALIGNMENT
- 4.5 TRACKS - DRIVING, STEERING AND TRACK WIDTH ADJUST
- 4.6 OUTRIGGER OPERATION
- 4.7 BOOM/PLATFORM OPERATION
- 4.8 Platform Removal/Installation
- 4.9 BATTERY CHARGING - GAS/AC-ELECTRIC
- 4.10 BATTERY CHARGING - LITHIUM-ION MACHINE
- 4.11 SHUT DOWN AND PARK
- 4.12 LIFTING AND TIE DOWN
- 4.13 MACHINE DECALS
- Section 5. EMERGENCY PROCEDURES
- 5.1 General
- 5.2 Incident Notification
- 5.3 Emergency Operation
- Power Main Cut-Off Switch Location
- Operator Unable to Control Machine
- Platform or Boom Caught Overhead
- Manual Descent with Engine Running and Electrical Power
- Manual Descent with Engine Running but without Electrical Power (Combustion Engines Only)
- Manual Descent without Engine and Electrical Power
- Outrigger/Track Movement Emergency Procedure:
- 5.4 Safety Devices Bypass Key Use
- 5.5 Lithium-ION Battery Pack - Handling In Dangerous Conditions
- SECTION 6. GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
- SECTION 7. INSPECTION AND REPAIR LOG