JLG X600AJ Operator Manual - Manual (Page 14)

SECTION 1 - SAFETY PRECAUTIONS
1-2 – JLG Lift – 3121637
• An operator must not accept operating responsibili-
ties until adequate training has been given by com-
petent and authorized persons.
• Allow only those authorized and qualified personnel
to operate the machine who have demonstrated
that they understand the safe and proper operation
and maintenance of the unit.
• Read, understand, and obey all DANGERS, WARN-
INGS, CAUTIONS, and operating instructions on the
machine and in this manual.
• Ensure that the machine is to be used in a manner
which is within the scope of its intended application
as determined by JLG.
• All operating personnel must be familiar with the
emergency controls and emergency operation of
the machine as specified in this manual.
• Read, understand, and obey all applicable employer,
local, and governmental regulations as they pertain
to your utilization and application of the machine.
Workplace Inspection
• Precautions to avoid all hazards in the work area
must be taken by the user before and during opera-
tion of the machine.
• Do not operate or raise the platform from a position
on trucks, trailers, railway cars, floating vessels, scaf-
folds or other equipment unless the application is
approved in writing by JLG.
• Before operation, check work area for overhead haz-
ards such as electric lines, bridge cranes, and other
potential overhead obstructions.
• Check operating surfaces for holes, bumps, drop-
offs, obstructions, debris, concealed holes, and other
potential hazards.
• Check the work area for hazardous locations. Do not
operate the machine in hazardous environments
unless approved for that purpose by JLG.
• Ensure that the ground conditions are adequate to
support the maximum outrigger load indicated on
the outrigger load decals located on the machine.
Do not travel on unsupported surfaces.