Wear pad inspection, Turntable attach bolts, Wear pad inspection -15 – JLG X600AJ Operator Manual User Manual
Page 125: Turntable attach bolts -15
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121637
– JLG Lift –
6-15
Installation of Rubber Track
1. Ensure all hydraulic cylinder grease have been
removed
2. Align the track links with the wheel teeth. Position
the other end of the track on the track tensioning
wheel
3. Slowly rotate the drive wheel in reverse while,
using one steel pipe, pushing the track plate inside
the frame.
4. Verify the track links have engaged the wheel
teeth in the track tensioning wheel
5. Adjust track tension (see Loosening/Tightening
track section).
Wear Pad Inspection
Check for distance between wear pads and boom sections.
Distance is to be no more than 1/32nd inch.
Turntable Attach Bolts
Ensure the bolts of the coupling elements (turntable) are
torqued to 183 ft-lb. (248 Nm)
4
5
6