JLG 600SC_660SJC Operator Manual - Manual (Page 33)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121156 – JLG Lift – 2-13
15. Swing Drive Motor and Brake - See Inspection Note.
16. Control Valve (Tank Compartment) - See Inspection
Note.
17. Hydraulic Oil Return Filter - Housing secure; See
Inspection Note.
18. Hydraulic Oil Supply - Recommended oil level sight
gauge. (Check level with cold oil, systems shut down,
machine in stowed position) Cap in place and secure.
19. Hydraulic Oil Breather - Element in place, not
clogged, no sign of overflow.
20. Door and Latches, Right Side - Hood door and
latches in working condition. See Inspection Note.
21. Ground Controls - Switches and levers return to neu-
tral, decals/placards secure and legible, control mark-
ings legible.
22. Right Tension Mechanism - See Inspection Note.
23. Fuel Supply - Fuel filler cap secure. Tank - See
Inspection Note.
24. Idler, Right Front - See Inspection Note.
25. Dual Capacity Limit Switch - Switch operates prop-
erly.
26. Left Track - Properly secured plates, no loose or miss-
ing track bolts, no dislocation of the track pins. Proper
tension. See Inspection Note.
27. Idler, Left Front - See Inspection Note.
28. Left Tension Mechanism - See Inspection Note.
29. Bottom Rollers, Left Side - See Inspection Note.
30. Battery - Proper electrolyte levels; cables tight, no vis-
ible damage or corrosion.
31. Door and Latches, Left Side - Hood door and latches
in working condition, see Inspection Note.
32. Engine Air Filter - See Inspection Note.; element
clean.
33. Engine Oil Supply - Full mark on dipstick; filler cap
secure.
Figure 2-6. Daily Walkaround Inspection Points - Sheet 2 of 3