1 introduction, 2 operating specifications, 1 introduction -1 6.2 operating specifications -1 – JLG 600SC_660SJC Operator Manual User Manual
Page 95
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121156
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121157
Illustrated Parts Manual (Prior to S/N - 128000
Gradall Chassis)..................................................... 3121158
Illustrated Parts Manual (S/N - 128000 to Present) .. 3121251
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
- Prior to S/N 0300148842
Maximum Work Load (Capacity)
Unrestricted:
Restricted - 600SC
Restricted - 660SJC
500 lb. (230 kg)
1000 lb. (450 kg)
500 lb. (230 kg)
Maximum Travel Grade (Gradeability)
*
55%
Maximum Travel Grade (Side Slope)
*
5°
Max.Vertical Platform Height:
600SC
660SJC
60 ft. 3 in. (18.36 m)
66 ft. 8 in. (20.32 m)
Max.Horizontal Platform Reach:
600SC
660SJC
49 ft. 6 in. (15.09 m)
56 ft. 9 in. (17.3 m)
Turning Radius
0
Maximum Ground Bearing Pressure
600SC
660SJC
5.45 psi (0.383 kg/cm
2
)
6.5 psi (0.457 kg/cm
2
)
Maximum Drive Speed:
1.6 mph (2.6 kph)