JLG 2505 Operator Manual - Manual (Page 114)

Section 7 - Lubrication and Maintenance
7-10 31200359
Engine Oil
A. Engine Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open the engine cover.
3. Remove dipstick (1) and check oil mark. The oil should be between the full (2)
and add (3) marks within the crosshatched area of the dipstick.
4. Replace dipstick.
5. If oil is low, remove oil fill cap (4) and add motor oil to bring oil up to the full mark
in the crosshatch area.
6. Replace oil fill cap.
7. Close and secure the engine cover.
10
OW0970
OW1020
OAL1760
1
3
2
ADD
4