JLG 2505 Operator Manual - Manual (Page 83)

Section 5 - Attachments and Hitches
5-11 31200359
Hydraulic Quick Attach
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
Check to be sure lock pin is disengaged.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick attach back to engage attachment.
4. Press and hold switch (1) and button
(2), at the same time move the joystick
right to engage or left to disengage the
quick attach.
5. Raise boom to eye level and visually
check that the quick attach pin protrudes
through the hole. If the pin does not
protrude through the hole, place the
attachment on the ground and return to
step 2.
OAL2160
OAL2170
OAL2180
OAL1471
1
2
OAL1930
ENGAGED DISENGAGED