JLG 2505 Operator Manual - Manual (Page 44)

Section 3 - Controls and Indicators
3-6 31200359
Ignition
• Position P: Engine preheat at temperatures below 32° F (0° C). Hold in position
for approximately 10 seconds.
• Position 0: Engine off.
• Position 1: Voltage available for all electrical functions. Prohibits rotating switch
to position 2 in the event the engine does not start. Rotate key to position 0 then
back to position 2 to re-engage starter.
• Position 2: Engine start.
OAL1281
0
1
2
P