JLG 2505 Operator Manual - Manual (Page 80)

Section 5 - Attachments and Hitches
5-8 31200359
Example
A contractor owns a model xxxxx telehandler with a fork carriage. He knows this
attachment may be used with his model since:
• The attachment style, weight, dimensions and load center match the attachment
data on the capacity chart.
• The capacity chart is clearly marked for model xxxxx and corresponds with
machine configuration being used.
Below are examples with various conditions the contractor may encounter and
whether or not the load may be lifted.
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
Load Weight Distance Height OK to Lift
1 2500 lb (1134 kg) 6 ft (1,8 m) 4 ft (1,2 m) Yes
2 2000 lb (907 kg) 9.5 ft (2,9 m) 8 ft (2,4 m) NO
3 3000 lb (1361 kg) 4 ft (1,2 m) 9 ft (2,7 m) Yes
4 5250 lb (2381 kg) 2 ft (0,6 m) 16 ft (4,9 m) NO
OAL1801
20’
18’
16’
14’
12’
10’
8’
6’
4’
2’
0’
12’ 10’ 8’ 6’ 4’ 2’ 0’
XX”
XXXX XXXX
0°
10°
20°
30°
40°
50°
60°
70°
B
D
A
C
E
1
XX
+
= XXX XX MAX
XXXX
1850
LBS
2000 LBS
3000 LBS
4400 LBS
5500 LBS
Example 2
Example 1
Example 3
Example 4