JLG 2505 Operator Manual - Manual (Page 115)

Section 7 - Lubrication and Maintenance
7-11 31200359
Hydraulic Oil
A. Hydraulic Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Check level of hydraulic oil at the sight gauge (5) on the frame. The oil level
should be visible in the gauge window.
3. If hydraulic oil is low, open the engine cover and remove oil fill cap (6) from filler
neck. Add hydraulic fluid to bring oil up to the upper mark on the sight gauge.
4. Replace hydraulic oil fill cap.
5. Close and secure the engine cover.
10
OW0970
OW1030
OAL1780
5
6