JLG 2505 Operator Manual - Manual (Page 78)

Section 5 - Attachments and Hitches
5-6 31200359
Sample Capacity Chart (ANSI & CE)
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-5); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
OAL1771
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
XX XX XX XX XX XX XX
XX
XXXX XXXX
0°
10°
20°
30°
40°
50°
60°
70°
B
D
A
C
E
1
XX
+
= XXX XX MAX
XXXX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXX
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis.
Model XXXX is used for demonstration purposes only.
Boom Angle
Load zones indicate the
maximum weight that
may be safely lifted.
Load center must
be equal to or less
than value shown.
Attachment type,
weight and
dimensions must
be equal to or less
than the data
shown.
Boom
Extension
Indicator
(arc)
Quick Attach Type
Blank = Standard
Quick Attach
UQC = Universal
Quick Attach