JLG 1250AJP Operator Manual - Manual (Page 109)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121170 – JLG Lift – 6-19
4. A. Wheel Drive Hub (Prior to S/N 100128)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 liters (1/2 full)
Lube - EPGL
Interval - Change after first 150 hours then every 1200
hours of operation
Comments - Place Fill port at 12 o’clock position and Check
port at 3 o’clock position. Pour lubricant into fill port until it
just starts to flow out of check port.
NOTE: After S/N 0300134389 machines may be built with either Bonfigli-
oli or Reggiana Riduttori wheel drive hubs.
B: Wheel Drive Hub - Bonfiglioli (S/N 100128 to Present)
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 quarts (2 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every 1200 hours
of operation
Comments - Place Fill port at 12 o’clock position and Check
port at 8 o’clock position. Pour lubricant into fill port until it
just starts to flow out of check port.