JLG 1250AJP Operator Manual - Manual (Page 91)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121170 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121171
Illustrated Parts Manual ................................................................3121172
Troubleshooting Guide .................................................................3128411
Troubleshooting CD .......................................................................3128444
6.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Table 6-1. Operating Specifications - Prior to S/N 0300141446
Maximum Work Load (Capacity)
Unrestricted
Restricted
500 lb (230 kg)
1000 lb. (450 kg)
Max.Vertical Platform Height (Unrestricted) 125 ft. (38.1 m)
Max.Vertical Platform Height (Restricted) 125 ft. (38.1 m)
Max.Horizontal Platform Reach (Unrestricted) 63 ft. 2 in. (19.3 m)
Max.Horizontal Platform Reach (Restricted) 53 ft. 2 in. (16.2 m)
Up and Over Height 60 ft. 7 in. (18.5 m)
Main Boom Range (At Maximum Up & Over) +75° / -55°
Maximum Boom Swing 360° Continuous
JibPLUS
Length
Horizontal Motion
Vertical Motion
8ft. (2.44m)
125° working, 210° stowed
130° (+75/-55)
Max. Hydraulic System Pressure 4600 psi (317 Bar)