JLG 1250AJP Operator Manual - Manual (Page 72)

SECTION 4 - MACHINE OPERATION
4-18 – JLG Lift – 3121170
3. Reconnect the drive hubs by inverting the disconnect cap
when towing is complete.
4.14 SHUT DOWN AND PARK
To shut down and park the machine, the procedures are as fol-
lows:
1. Drive machine to a reasonably well protected area.
2. Ensure boom is lowered over rear drive axle.
3. Push in the Emergency Stop at Platform Controls.
4. Push in the Emergency Stop at Ground Controls. Position
Platform/Ground Select switch to center OFF.
5. If necessary, cover Platform Controls to protect instruction
placards, warning decals and operating controls from hostile
environment.
Figure 4-7. Drive Disconnect Hub