JLG 4394RT Service Manual - Manual (Page 137)

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121249 – JLG Lift – 3-101
Air Cleaner System
ALLOW ENGINE AND COMPONENTS TO COOL DOWN BEFORE
SERVICING.
REMOVAL:
1. Disable machine operation.
2. Pull the rubber elbow (3) off of the air cleaner (1) and
air intake tube (4).
3. Pull the air intake tube out of the sleeve (5). Pull the
sleeve and air intake tube (6) out of the engine.
4. Loosen the bolt on the mounting bracket (2) to
remove the air cleaner (1).
NOTE: The filter element can be removed from the air
cleaner by releasing the latches on the end of the air
cleaner. Replace filter element as needed.
INSTALLATION:
1. Follow Removal Steps in reverse.
1
2
3
4
5
6
Figure 3-73. Air Cleaner System (GM Engine)
1. Air Cleaner
2. Mounting Bracket
3. Rubber Elbow
4. Air Intake Tube
5. Sleeve
6. Air Intake Tube