JLG 4394RT Service Manual User Manual
Page 45
Advertising
SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121249
– JLG Lift –
3-9
7. Remove Snap Rings (13).
8. Pull out Plane Gears (1).
9. Drill 2 holes into Shaft Nut (4) at 180° spacing
according to Drilling Hole Sketch (step 10).
DO NOT DAMAGE THE BEARING CAGE OF TAPERED ROLLER
BEARING. CAREFULLY REMOVE METAL CHIPS.
10. Drilling Hole Sketch
11. Split the Shaft Nut (4) in the area of the two drill
holes by means of a chisel, and remove from Spin-
dle (34).
DO NOT DAMAGE THE BEARING CAGE OF THE BEARING (11).
DO NOT TURN THE SHAFT NUT; POSSIBILITY OF SPINDLE
THREAD DAMAGE.
Advertising
This manual is related to the following products: