JLG 4394RT Service Manual - Manual (Page 225)

SECTION 5 - JLG CONTROL SYSTEM
3121249 – JLG Lift – 5-19
NOTE: When configuring an RT, the Machine Configuration must be completed before any Personality settings can be
changed. Changing the Personality settings first and then changing the Model of the Machine Configuration will cause
the Personality settings to return to default values.
Table 5-3. Machine Configuration Programming Information
Configuration Digit Setting Description Default Number
1
(MODEL)
0
1
2
3 33RT 2WD
33RT 4WD
43RT 2WD
43RT 4WD
1
2
(ENGINE)
0
1
2
3
4
5 FORD EFI D/F
DEUTZ F3
FORD D/F (T2)
DEUTZ F3 (T2)
DEUTZ ECM
DUAL FUEL ECM - GM/PSI Engine
4
3
(MARKET)
0
1
2
3
4
ANSI USA
ANSI EXPORT
CSA
CE
AUSTRALIA
0
4
(TILT CUTOUT)
0
1 NO - Tilt Cutout is not active
Yes - Tilt Cutout is active
(Screen only visible to CE Market)
1
5
(GLOW PLUGS)
0
1
2
3
4
5
6
7
NO GLOW PLUGS
5 SEC GLOW
10 SEC GLOW
20 SEC GLOW
30 SEC GLOW
40 SEC GLOW
50 SEC GLOW
60 SEC GLOW
5
6
(LEVELING JACKS)
0
1
No - Leveling Jacks not installed on vehicle.
YES — Leveling Jacks are installed on vehicle.
0
7
(POWER DECK)
0
1
2
NONE — Power Deck Extensions not installed on vehicle.
FRONT — Power Deck Extension is installed on the Front of the vehicle.
DUAL — Power Deck Extensions are installed on the Front and Rear of the vehicle.
0
8
(GENERATOR)
0
1
2
NOT INSTALLED — Generator is not installed on the vehicle.
60HZ — Generator is installed and engine speed set for 2000RPM when enabled.
50HZ — Generator is installed and engine speed set for 1700RPM when enabled.
0
9
(FUNCTION CUTOUT)
0
1
2
NOT INSTALLED — Vehicle is not equipped with a Function Cutout device.
DRV & LIFT UP — Vehicle is equipped with a Function Cutout device. Drive and Lift Up will
be prevented when active.
ALL FUNCTIONS — Vehicle is equipped with a Function Cutout device. All Functions will
be prevented when active.
0