JLG X390AJ Operator Manual - Manual (Page 62)

SECTION 4 - MACHINE OPERATION
4-18 – JLG Lift – 3128792
2. Secure the platform to the jib mounting posts with
the aluminum threaded caps. Do not overtighten.
3. Re-install the platform/remote control box into the
mounting support on the platform.
4.8 BATTERY CHARGING - GAS/DIESEL/AC-
ELECTRIC
NOTE: Be sure that the machine is parked in a well ventilated
area free of flames and sparks.
• Only plug the charger into a properly grounded outlet.
• Do not use ground adaptors or modify plug. Do not
touch non-insulated portion of output connector or non-
insulated battery terminal.
• Always disconnect the AC supply before making or
breaking the connections to the battery.
• Do not open or disassemble charger.
• Do not operate charger if the AC supply cord is dam-
aged or if the charger has been damaged in any way.
Battery Charging - Daily
BEFORE CONNECTING THE BUILT-IN CHARGER TO THE RECEPTA-
CLE, ENSURE THE KEY ON THE ENGINE IS POSITIONED TO OFF.
The machine has a built-in battery charger. To activate this
feature connect the machine to an appropriately grounded
AC receptacle (item 1) - right side of machine and activate the
breaker switch (item 2) behind the clear plastic door - left side
of machine. (See photo) Verify the battery disconnect switch
is set to ON.
1
2