Hand signals – JLG TF6-42 (9150-4003) Operator Manual User Manual

Page 91

Advertising
background image

Form No. 20140, Issued 3/03

z

z

z

z

z

Transformer Series Work Platform Manual

HAND SIGNALS

Standard Signals - When handler work conditions require hand signals, they shall be provided or posted conspicuously

for the use of both signalman and operator. No handler motions shall be made unless signals

are clearly understood by both signalman and operator.

Special Signals - When signals for auxiliary equipment functions or conditions not covered are required,

they shall be agreed upon in advance by the operator and signalman.

Instructions - When it is desired to give instructions to the operator other than provided by the established signal

system, all handler motions shall first be stopped.

EMERGENCY STOP - With both arms
extended laterally, hands open

downward, move arms back and

forth.

STOP - With either arm extended

laterally, hand open downward,

move arm back and forth.

RAISE BOOM - With either arm ex-

tended horizontally, fingers closed,

point thumb upward.

LOWER BOOM - With either arm

extended horizontally, fingers

closed, point thumb downward.

EXTEND TELESCOPIC BOOM - With

both hands clenched, point thumbs

outward.

RETRACT TELESCOPIC BOOM - With

both hands clenched, point thumbs
inward.

MOVE SLOWLY - Place one hand

motionless in front of hand giving

motion signal. (Raise load slowly is
shown)

THIS FAR TO GO - With hands raised

and open inward, move hands
laterally, indicating distance to go.

STOP ENGINE - Draw thumb or

forefinger across throat.

Advertising