JLG 19AMI Operator Manual - Manual (Page 45)

SECTION 4 - MACHINE OPERATION
3121189 – JLG Lift – 4-11
Lifting
If it becomes necessary to lift the machine, use suitable lifting
equipment capable of handling the weight of the machine, see
below.
NOTE: Fork lifts, cranes, chains, slings, etc. must be capable of
handling the following weights:
NOTE: The 19AMI is equipped with forklift pockets at the mast
end of frame for transporting the unit. An optional mast
mounted crane hook is available. Do not attempt to lift with
a crane without the optional crane hook.
Transport Vehicle Tie Down
(See Figure 4-6.)
When placing the AMI machine onto a transport vehicle for
transport to another work-site, always tie machine securely to
the transport vehicle using the tie down pockets provided on the
machine. There are four tie down pockets, one on each corner
of the machine. Use corner tie down pockets as needed. Tie
down method shown is for illustrative purposes only.
Table 4-2. AMI Machine Gross Weights
AM Model Gross Weight
19AMI 1,140 lb. ( 517 kg)
Figure 4-6. AMI Tie Down Pockets.
CORNER
TIE DOWN
POCKETS
CORNER
TIE DOWN
POCKETS