JLG 19AMI Operator Manual - Manual (Page 58)

SECTION 7 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
7-4 – JLG Lift – 3121189
Machine Component Weights
Serial Number Locations
For machine identification, a serial number plate is affixed to the
machine. The plate is located on the back of the mast, just above
the mast support bracket.
7.3 SUPPLEMENTAL INFORMATION
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A).
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/ 14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 109 dB.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s2. The highest root mean square
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s2.
SPECIFICATION 20AM
Platform Weight : Standard Platform: 55 lb. (25 kg)
(Quick-Change Platforms) Extendible Platform: 70 lb. (32 kg)
DC Voltage Battery Pack: (Wet Cell) 70 lb. (32 kg)