2n officeroute – 2N OfficeRoute - User Manual User Manual
Page 11
2N OfficeRoute
11
3.3 Proper Mounting
The device is designed for mounting on a vertical
surface. For this purpose a wall mounting holder is
available. Just fit the holder with dowels and screws
to the wall and hang the device.
Fig. 3 – Gateway Holder Wall-Mounting
Fig. 4 – Gateway Holder-Hanging
It is possible to operate this device in another working
position (e.g. on a desk) for a short time only, for
example in servicing centres for quick testing
purposes.
The allowed working temperature and relative
humidity ranges are included in Section bellow.
Exceeding the recommended operating temperature
values need not affect the gateway function
immediately but may result in more rapid ageing and
lower reliability.
The device is intended for indoor use. It may not be
exposed to rain, flowing water, condensed moisture,
fog, or mist.