2N OfficeRoute - User Manual - Manual (Page 38)

2N OfficeRoute
www.2n.cz
38
PASSWORD for authorization are the same as the
USERNAME and PASSWORD for web-based interface
of VBE. Authentication could be set in web-based
interface of VBE. Domain name must be equal to POP3
domain name (Fig. 27). Server awaits e-mail in format
Text/Plain,
Text/HTML, Multipart/Mixed or
Multipart/Alternative. From the message in format
Text/HTML, only the body of HTML message, without
formatting, is put onto the SMS message. From
messages Multipart/Mixed and Multipart/Alternative
only the first part of message is used, enclosed between
strings, mentioned in the header under name
“boundary“. Server supports the only messages in 7 bit
format in encoding according to ISO-8859-1 or 16 bit
Unicode UTF-8 (messages with the different encoding
could be illegible after receiving message in form of
SMS). SMTP server enables sender IP address control
as well as authentication. With help of web-based
interface, you can enable or disable IP address control
as well as set the list of allowed IP addresses (Fig. 27
and Fig. 28). SMTP server makes one or more SMS
messages from incoming e-mail (maximum number of
created SMS messages is set in web-based interface. It
is possible to set from 0 to 100 messages, Fig. 27) in
form F:<sender><CRLF>S:<e-mail subject (max. 10
characters)><CRLF>e-mail body. Messages with length
of 160 characters are sent subsequently to receiver via
Admin account (already sent SMS messages are
available in SENT directory of user Admin).
Fig. 25 – SMS delivery – SMTP IP access