2n officeroute – 2N OfficeRoute - User Manual User Manual
Page 15
2N OfficeRoute
15
3.7 SIM Card Insertion
To insert your SIM card in the device, press the yellow
button on the appropriate card drawer with a suitable
tool to make the drawer slide out a little. Remove the
drawer, insert the SIM card and replace the drawer. You
can not replace SIM cards even with your device on.
Fig. 8 – SIM Card Inserting Procedure
3.8 PC Connection
You need direct interconnection of your 2N
OfficeRoute gateway and PC especially when you do
not know the gateway IP address and thus cannot
configure it using a web browser. In such a case,
connect the gateway directly to your PC USB port with
the cable enclosed and select the basic network
parameters using your console interface.
You can control the console interface with any terminal-
emulating
program
according
to
the
VT-100
specification at least. The Microsoft Windows OS, e.g.,
contains a communication tool HyperTerminal, which
can be used for this purpose.
By default, the gateway serial port communication
parameters are set at 921,600 bits per second, 8 data
bits, no parity, 1 stop bit, no flow control. Set the
communication program on the PC side identically.