2n officeroute – 2N OfficeRoute - User Manual User Manual
Page 33
2N OfficeRoute
33
Fig. 20 – ‘Add LCR table item’ form
There is an example of a LCR rule. Destination name is
user defined, the rule is applied to called numbers with
prefixes 6 or 7, call is routed to the route ‘ Mobile
networks’ with unknown priority. Priority can be
according free minutes, first free or cycle (for free
minutes and cycle a tariff must be defined for each line
of the route).
LCR test – you can test routing rules after setting all
routing rules and routes. For routing test SIM cards
must be placed in the unit in order to have test fully
functional.
GSM routing – setting of incoming calls routing. The
procedure is follow: at first it is necessary to define
operator’s service and then assign operator’s service to
a module. Operator’s service can be routing to a