2N OfficeRoute - User Manual - Manual (Page 14)

2N OfficeRoute
www.2n.cz
14
3.6 Gateway Power Supply
Be sure to use only the mains supply adapter that is
included in this device delivery.
Before plugging in the device, make sure that the
mains voltage value meets the data given on the
mains adapter label.
Furthermore, make sure that the antenna has been
connected. If you connect the device to the power
supply without an antenna, the UMTS/GSM module
transmitter might get damaged.
Now plug the supply adapter into a mains socket and
connect the adapter connector to the device,. The
status indicators indicate the proper operation. For
their meanings refer to a Subsection.
Fig. 7 – Supply Adapter Connection