2N Indoor Touch User guide v1.2 - Manual (Page 15)

15
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.4 Status LED
Status LED indicates the device states when the LCD display is switched off or the
device is in the service mode. See the table below for the LED colours and states:
Device Startup:
Colour State
Blue is on Device initialisation
Red is on First boot phase
Green is on Operating system start
Yelow is on Factory setting initialisation
Blue is flashing Factory reset
Purple is flashing System upgrade process
No light Device state is displayed
Standard Operation:
Colour State
No light Device state is displayed
White is
on
Stand-by mode (display off)
Other
states Notification of other states of applications running in the system ( 2N
®
, e.g.). Helios IP Mobile