2N Indoor Touch User guide v1.2 - Manual (Page 20)

20
2N TELEKOMUNIKACE a.s., www.2n.cz
®
3.3 Launcher Configuration
Click the button on the introductory page to access the configuration section. Settings
Complete the correct access password.
The configuration section consists of the following screens and subsections:
System info – display information on the device state.
Networks – configure the device network adapters.
Local settings – set the installation site and input device language.
Audio – set the device audio parameters.
Display – set the device display parameters.
Home screen – modify and set the introductory screen buttons.
Software – set the application installation/uninstallation.
Advanced – restart and LOG.
System Info
Display the following information on the device:
Device – serial number, configuration and current state.
Local – local date and time.
Memory – current RAM state.
Internal storage – current internal storage state.
Licence – current licence state.
Add licence – licence adding option*.
Cache – current cache state.
SD card storage – external SD card (if inserted) memory state.
LAN, WiFi – current Ethernet and WiFi adapter configuration.
Caution
The factory access password is "2n“. If you lose the access data, you will
have to factory reset the device! Change the password in the Settings –
Home screen menu.
Caution
Remember that the original licence key will always be overwritten with the
new one! Therefore, add only a valid licence key supplied by your
distributor!