2N Indoor Touch User guide v1.2 - Manual (Page 18)

18
2N TELEKOMUNIKACE a.s., www.2n.cz
®
1.
2.
a.
b.
c.
3.1 Factory Reset
Follow the steps below to reset the factory values: 2N Indoor Touch
®
Push the Factory reset button in the Launcher Configuration menu. Refer to 3.3
. Launcher Configuration
Press and hold the Reset button on the device backside:
Remove the device from the installation holder.
Press the Reset button and hold until the notification RGB LED lights up
(yellow).
Release the Reset button and follow the instructions displayed.
Caution
Factory reset results in a complete deletion of all user data.