2n bri enterprise connection as dialthru router – 2N BRI Lite/Enterprise v1.6 User Manual
Page 29
Advertising
29
2N BRI Enterprise Connection as DialThru Router
®
This type of connection saves one BRI port to the PBX. Incoming PSTN calls are treated
by the GSM/UMTS gateway in the DialThru mode while outgoing calls are routed
according to the LCR table.
The figure below shows the gateway as a DialThru router for the Point-to-Multipoint
extension. Calls are routed automatically into GSM, UMTS or ISDN based on the
internal LCR rules.
Advertising