Clip routing table + callback, Mobility extension, Ethernet configuration – 2N BRI Lite/Enterprise v1.6 User Manual
Page 73
73
to
), the GSM gateway automatically terminates the call and
GSM basic settings
seeks for another call setup way. If this parameter is activated, the GSM gateway
ignores the tone detection results and sets up a call when this is the only possible
call establishing way.
CLIP Routing Table + CallBack
Use the table to set a fixed CLIP assignment of incoming CLIPs from GSM to the
numbers of extensions to which incoming calls are routed automatically. Also, set the
CLIP list in the GSM network for which CallBack is enabled.
GSM number (CLIP) – user Id in GSM/UMTS.
Autodial – enable/disable CLIP routing for the selected CLIP.
Dial to VoIP – VoIP destination number for the CLIP routing function.
Auto CallBack – enable/disable CallBack routing for the selected CLIP.
Limit – set the maximum call duration (minutes).
Mobility Extension
Use this table to register the Mobility Extension users.
Name – user name for calling to VoIP.
User – registration user name for VoIP.
Password – registration user password for VoIP.
GSM number (CLIP) – user SIM card CLIP.
Follow me function – enable/disable call forwarding to the user mobile station
(according to CLIP).
SMS at no answer function – enable/disable sending of SMS on missed calls.
Ethernet Configuration
Use this window to set the gateway Ethernet interface.
Use DHCP – enable/disable the DHCP client function for
gateway.
2N BRI
®
IP address – fixed IP address (v4) for the
gateway Ethernet interface.
2N BRI
®
Subnet mask – network mask for the
gateway Ethernet interface.
2N BRI
®
Default gateway – IP address (v4) of the IP gateway in the Ethernet.
DNS server1 – primary DNS server.
DNS server2 – secondary DNS server. Used as a back-up when DNS server 1 is
not functional.
Note
If you use tariff routing, set the tariffs properly in the GSM outgoing
subsection
groups
The maximum count of LCR table records is 64.
Note
Remember to activate the CallBack mode in the GSM incoming groups
for a proper function.
The maximum count of CLIP routing table records is 96.