2N BRI Lite/Enterprise v1.6 User Manual
Page 68
68
CLIR – enable/disable presentation of the SIM CLI on the called party's
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.
Maximum number of called minutes – define the maximum count of minutes to
be called within a month via the selected SIM card.
SMS messages number – define the maximum count of SMS messages to be sent
within a month via the selected SIM card.
Day of restoring call limit and delete statistics – select a day in a month on which
the
and
statistics shall
Max count of called minutes
Count of SMS messages
be deleted.
First count – set the length of the first pulse after which the pulse counting
change starts as defined in the
parameter.
Next count
Next count – set the length of one pulse in seconds after the time defined in the
parameter elapses.
First count
Day limit of called minutes – set the maximum count of minutes to be called
within a day via the selected SIM card.
Time limits
There are two SIM use time limits in a GSM group.
Note
Before enabling roaming, please use your mobile phone to make sure that
the GSM/UMTS searching priorities have been set properly on the SIM
card.
Caution
Calls via a roaming network may increase your telephone call costs!
Caution
The
and
services
Temporary CLIP enable
Temporary CLIR enable
must be supported by the GSM/UMTS provider's network. Otherwise, the
call may be rejected by GSM/UMTS!
Note
Set the two parameters above (
,
) properly to
First count Next count
count free minutes on SIM cards correctly. These parameters are used for
limiting outgoing calls depending on free minutes. The CDRs contain real
data.