2N NetStar Hardware manual - Manual (Page 22)

22
TE port set–up
For TE port the pins 1–2, 3–4, 5–6, 7–8 should be connected.
Extender connection interface
Interface type – proprietary
Connection – RJ45 (8x8)
Maximum connection length – 160cm (wiring supplied as a part of the
extender package)
Total interface capacity – 124 calls
Ratio capacity of the interface – 4x 31 calls
Maximum capacity per 1 extender 88 calls
1x PRI interface
Interface type – S0 without power supply / NT–TE
Protocol – DSS1 – EURO ISDN
Connection – RJ45 with LED control