2N StarPoint manual - Manual (Page 12)

12
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
2.1 Outgoing calls
Outgoing Call Setup
Pick up the handset. You can hear the dialtone.
Dial a number. Having dialled the last digit, wait for automatic call setup.
If stored in your or group directory, the called subsriber's name is also displayed.
The call time will be displayed when the called subscriber answers.
If the called user is busy, you will get the busy tone and the
message Call end
gets displayed.
Or, you can enter the called number on your phone diplay first and
then pick up the handset to set up the call.
Push the HandsFree button to use the HandsFree function instead of lifting the
handset. The HandsFree button indicator signals activation. Push the HandsFree button
again to terminate the current call.
If the HandsFree button is not programmed on your phone, just press
the confirmation button after dialling a number to activate
HandsFree .
Outgoing Call to Call Register Record
The telephone stores records on missed, incoming and outgoing calls, the so–called call
register. Using these records, you can call the subscribers whom you called or who
called you before. The call register can contain up to one thousand records.
Response to Missed Call
Situation:
The phone is signalling missed calls. You want to reply to these calls.
Procedure:
Push to enter the list of missed calls.
Or, use the pre–programmed missed call accessing button if available.
If the missed call is not displayed, push to enter the main menu, select Call
and then . register Missed calls
Now you can see the list of missed calls on your display. Use and to
browse through the list items.
Having selected the item to be called (using the confirmation button), pick up the
handset or push the HandsFree button.
Call to Previously Called Number
Situation:
You want to make a call to a number you called before.
Procedure: